Windsor
style Balustrading
 This
is our most versatile design, ranging in height from 605mm to 795mm. Available
with rails and plinths running into the side of the piers (side run in) and with
rails and plinths running into the centre of the piers (central run in). Twice
weathered or flat top rails. Various styles of balusters will suit this design. |
Traditional style Balustrading
 Our
original design is still very popular. Piers are slightly higher than the top
rail and balusters are normally set at 300mm
centres. There are seven different styles of baluster
(520mm high) which will fit the standard height.
|
Roman Style Balustrading
 Designed
to meet UK building regulations where there is a drop of
over
600mm from
patio or balcony to ground level.
Height 1100mm - When balusters spaced at 177mm centres, a ball of 100mm
diameter will not pass through them.
|
Balusters
 With
over 35 baluster designs to choose from your sure to
find your requirement. Many match styles found in London streets.
Sizes from 300mm to 775mm high - round or square in section
|
Custom Made Balustrading
 Our
mould shop can match any existing design or manufacture to your specification. Shown
to the left is a double spiral balustrade with a radius front at first floor
level. In all 20 custom made moulds were required. |
